Looks good. How did you do it ? Valve cover on off ? What did you use for paint ?
Off the car - cleaned it thoroughly with engine degreaser and brake cleaner (I'm anal), scuffed it with 60 grit sandpaper, cleaned again with soap and water, let it dry, coat w/ VHT primer, 3 light coats and 2 heavy of VHT wrinkle paint (black), let it dry for 3 hours, put it in the over at 200 degrees for 60 minutes, let it sit out for 24 hours, and put it back on. I plan on doing the manifold as well - to make it mesh better. To me it looks a little out of place with the silver manifold.
easy and cheap, just time consuming
