Author Topic: hardwire radar detector  (Read 2895 times)

Offline jakeee x

  • Member
  • Posts: 12
    • View Profile
hardwire radar detector
« on: October 19, 2010, 01:08:03 AM »
what happens if my escort x50 is run on 14 volts? it showed the vehicle voltage at 14.2 or around there. does that affect the performance?

Offline A4 Maine-iac

  • Administrator
  • Member
  • *****
  • Posts: 589
    • View Profile
Re: hardwire radar detector
« Reply #1 on: October 23, 2010, 06:17:00 AM »
 You should be fine. Ive been running mine for 4 years now with no issues. And i believe that it runs on 12v.

Offline Flatusboy

  • Member
  • Posts: 0
    • View Profile
Re: hardwire radar detector
« Reply #2 on: February 06, 2011, 09:59:26 AM »
Any reason why this wouldnt work?
I have tried this twice and neither time has it worked. 

I either do not have 12v to that post, or that bolt location isnt a sufficient ground.
I connected the radar and a volt meter, 0.00v.

Thanks

Offline A4 Maine-iac

  • Administrator
  • Member
  • *****
  • Posts: 589
    • View Profile
Re: hardwire radar detector
« Reply #3 on: February 08, 2011, 03:49:59 PM »
I persnoally did my ground and power in the over head light / sunroof switch. Cant remeber which one exactly. I have had no issues.

Offline info@a4mods

  • Administrator
  • Member
  • *****
  • Posts: 805
    • View Profile
Re: hardwire radar detector
« Reply #4 on: February 08, 2011, 08:17:44 PM »
All vehicles run between 11 and 14 V depending on what they are commanding the alternator load to be.  Ideally they would run at the minimum voltage required, but there are actually algorithms that bring voltage up to maintain battery life, etc

Offline JoneaAbrsham

  • Member
  • Posts: 6
    • View Profile
    • View my site
Re: hardwire radar detector
« Reply #5 on: September 15, 2012, 11:16:36 PM »
When i persnoally would my surface and power inside over brain light / sunroof swap. Cant remeber what type exactly. I've had not any issues.

 

Currently Online
Maximum Simultaneous Users